Solar Panels and Roofing: What to Check Before Installing
Installing solar panels is one of the most popular ways Canberra households reduce energy bills and cut emissions. With the ACT's strong solar resource, cold clear winter days and a government committed to renewable energy, rooftop solar remains a sound investment in 2026. However, your roof is the foundation of any solar system. Panels typically stay in place for 25 years or more, so checking the condition, structure and suitability of your roof before installation can save you thousands of dollars and avoid disruptive rework later.

This guide covers the key roofing checks to make before you sign a solar contract, with a focus on conditions common in Canberra and the surrounding region.
Why Your Roof Matters for Solar Installation
Solar panels are mounted to your roof with rails and brackets that penetrate or clamp onto the roofing material. If the roof is in poor condition, you may need to remove the entire array to carry out repairs or a replacement. Removal and reinstallation by a licensed installer can cost from several hundred to a couple of thousand dollars, depending on system size. It is far more cost-effective to resolve roofing issues first.
A typical residential system of 6.6 kW to 10 kW with 15 to 25 panels also adds weight to the roof. Most panels weigh around 20 to 25 kg each, so the structure must be able to carry the additional load safely, along with wind uplift forces.
Check the Age and Condition of Your Roof
The first question to ask is how much life your roof has left. If your roof is within 5 to 10 years of needing replacement, it is usually wise to re-roof before installing solar.
Typical Roof Lifespans
- Concrete tiles: 40 to 50 years, though the pointing and bedding on ridge caps may need attention sooner.
- Terracotta tiles: 50 years or more, but individual tiles can crack and become brittle with age.
- Colorbond and metal sheeting: 40 to 60 years depending on coating, fixings and exposure.
- Older corrugated galvanised iron: Often reaching the end of its life, with rust at fixings and laps.
- Asphalt shingles and membranes on flat sections: Typically 15 to 25 years.
Have a qualified roofer inspect for cracked or slipped tiles, rust, loose fixings, sagging sections, failing sarking, worn flashings and deteriorating sealant around penetrations. Fix any issues before the https://cashyvhj747.capitaljays.com/posts/the-pros-and-cons-of-polycarbonate-roofing-for-act-patios solar installer arrives.
Understand Your Roof Material
Different roof types need different mounting methods, and some are easier and cheaper to work with than others.
Tile Roofs
Tile roofs are very common across Canberra suburbs. Installers use tile hooks or replacement tile brackets that sit under or through tiles. Because tiles can crack during installation, ask your installer how they manage breakages and whether they carry spare tiles that match your existing profile. Older, brittle tiles are more likely to break, and sourcing matching replacements for discontinued styles can be difficult.
Metal Roofs
Metal roofs, including Colorbond, are generally the simplest for solar. Panels can be clamped to standing seams without penetrating the roof, or fixed to rails screwed into purlins with appropriate sealing. Check that fixings are tight and that the sheeting has no corrosion before installation.
Flat and Low-Pitch Roofs
Flat roofs often need tilt frames, ballast or additional waterproofing considerations. Confirm the membrane condition and ask about warranty implications when penetrations are required.
Asbestos: A Critical Safety Check
Many Canberra homes built before the late 1980s may contain asbestos in roof sheeting, eaves, or other building materials. Drilling into or disturbing asbestos cement sheeting is hazardous and heavily regulated. If your home was built before 1990, have the roofing materials assessed by a licensed asbestos assessor before any solar work begins.
Reputable installers will not proceed on a roof they suspect contains asbestos without proper testing and a safe work plan. If asbestos is confirmed, the typical solution is to have the roof professionally removed and replaced before solar installation. Never attempt to drill, clean or pressure wash suspect sheeting yourself.

Assess Roof Orientation, Pitch and Shading
The physical layout of your roof affects how much energy your system produces.
- Orientation: In the southern hemisphere, north-facing roof planes generally deliver the highest annual output. East and west-facing planes can still perform well, and many households choose a split system to generate power earlier in the morning and later in the afternoon.
- Pitch: A pitch of roughly 20 to 35 degrees suits Canberra well, and the city's higher latitude means slightly steeper angles can help capture winter sun.
- Shading: Trees, neighbouring buildings, chimneys and antennas can reduce output. Canberra's mature street trees are a feature of many suburbs, so shading analysis is especially important. Consider whether trees will grow taller over the coming years.
- Available space: Panels need clearance from roof edges and ridgelines for safety and wind loading. Skylights, vents and solar hot water systems can reduce usable area.
Structural Integrity and Roof Framing
Beyond the surface material, the underlying structure should be sound. Older homes may have undersized rafters or battens, or timber that has been affected by moisture or pests. A solar installer should check the roof framing, and in some cases a structural engineer's assessment is appropriate, particularly for heritage homes, large arrays or roofs showing signs of sagging.
Canberra experiences strong seasonal winds and occasional severe hailstorms. Panels must be fixed securely to rafters or purlins rather than only to roofing sheets or tiles, and the system should comply with Australian Standards for wind loading. Ask your installer to confirm the wind region classification used for your property.
Think About Waterproofing and Penetrations
Every bracket that penetrates a roof is a potential leak point if installed poorly. Check that your installer uses quality flashings, sealants and waterproof mounting systems designed for your roof type. Ask whether they provide a workmanship warranty covering roof leaks related to the installation, and for how many years. Cheaper installers sometimes cut corners here, and leaks may only appear months or years later.
Consider Whether You Need to Replace the Roof First
If you are planning a re-roof within the next decade, coordinate the two projects. Many roofers and solar installers work together, and doing the roof first lets you install new sarking, insulation and flashings, then mount the panels on a fresh surface. In some cases, combining the work in one project can streamline scheduling and reduce scaffolding and access costs.
Also consider adding roof insulation and ventilation at the same time. Canberra's cold winters and hot summers mean a well-insulated roof can significantly improve comfort and reduce heating and cooling costs, complementing your solar savings.
Heritage, Planning and Approval Considerations in the ACT
Most rooftop solar installations in the ACT do not require development approval, but there are exceptions. Properties in heritage precincts or listed on the ACT Heritage Register may have restrictions on panel placement, particularly on roof planes visible from the street. Some unit-titled properties also require approval from the owners corporation before any work on common property, which includes roofs.
Check with the ACT Government planning authority and your owners corporation if relevant. It is also worth confirming requirements with your network provider, Evoenergy, which manages connection standards for solar and battery systems in the ACT.
Electrical Readiness and Switchboard Checks
Although this article focuses on the roof, the electrical side matters too. Cable runs from roof to inverter and switchboard should be planned carefully, with conduits that are UV-rated and neatly fixed. An older switchboard may need upgrading to meet current safety standards, and some homes with ceramic fuses or limited capacity require additional work. Ask your installer to inspect the switchboard before quoting.
Battery Storage and Future-Proofing
Home batteries continue to grow in popularity in 2026, supported by falling prices and various government and ACT-based incentives. Even if you do not install a battery now, it is smart to design your system so one can be added later. This may influence your choice of inverter, roof layout and cabling. Similarly, if you plan to purchase an electric vehicle or switch from gas to electric appliances, you may want a larger array, which requires more roof space.
Questions to Ask Your Solar Installer
Before committing, ask your installer direct questions about the roof and installation process. Useful topics include:
- Will you inspect the roof and framing in person before providing a final quote?
- Are your installers Clean Energy Council accredited, and is the work carried out by licensed electricians?
- What mounting system will you use, and is it certified for my roof type and wind region?
- How do you handle broken tiles or damaged roof sections during installation?
- What workmanship warranty covers roof penetrations and leaks?
- What is the procedure if the roof needs repairs after the panels are installed?
- How will the system be designed to minimise shading losses?
Maintenance After Installation
Once solar is installed, keep an eye on your roof. Clear leaves and debris from gutters and from beneath panels, especially in autumn when Canberra's deciduous trees drop heavily. Arrange an inspection every few years, and after severe hail or wind events, to check for loose fixings, cracked tiles or damage to panels. Regular checks help catch minor issues before they become costly repairs.
Final Thoughts
A successful solar installation begins with a roof that is structurally sound, watertight and suited to the system you want. Taking the time to check roof age, material, asbestos risk, structure, shading and approvals will help you avoid unexpected costs and ensure your panels perform well for decades. If you have any doubts, engage a qualified local roofer for an inspection before requesting solar quotes, and choose an accredited installer who takes the time to assess your roof properly. Getting the roof right first is the best way to protect your investment and get the most from Canberra's abundant sunshine.
Canberra Roof Restoration Experts
(02) 6105 9817